Green Energy Panels

ABOUT US

Leader in Power Factor Correction Nationwide

Our Company

f OUNDED in 2009 Green Energy Panels are an economical way for commercial and residential properties to achieve a lower energy cost by changing the usage profile and by cleaning up the power being used.

Green Energy Panels use exclusive copyrighted software in a state of the art, energy saving and power conditioning system.  The Green Energy Panels systems specifically engineered to effectively and economically optimize power.  The Green Energy Panels minimize disruptions to equipment or machinery.

The Panels use software working in the microprocessor to monitor each independent part of the units.  They monitor multiple problems, anomalies and functions throughout the facility in which they are installed.

The Panels are designed to keep the power quality constant and balanced on each electrical breaker panel in which they are installed. Surveys by qualified sales personnel are used to determine which electric breaker panel will need a Green Energy Panel installed. Inductive loads from electric motors and other electrical applications are targeted in the surveys.

Green Energy Panels are providing impressive savings with payback periods averaging less than eighteen months. They improve the quality of electrical service while reducing the usage profile, power penalties, maintenance and downtime.

  • What are Green Energy Panels?

    Green Energy Panels (GEP) are carbon reducing devices that are certified in both the USA and Canada as “Power Factor Correcting and line Surge Suppressor Devices”. They reduce the strain and loads on the electrical grids and keep the Power Factor in harmony at all times. Power Companies and Consumers alike should receive carbon credits for installing Green Energy Panels when Carbon Credits are available.

  • Who needs Green Energy Panels?

    Clients who have inductive electrical devices operating at any facility, GEP will help them save energy. Examples of Induction are: air conditioner electric motors, compressors, refrigeration units, chillers, freezers and electrical equipment of every kind which cycles on and off. When they start, additional electric energy is called upon to handle the power needed to start them. The needed reactive power can come in from outside in the form of Demand or from the GEP in the form of reactive energy. Demand comes with a surcharge from your electric provider. GEP is computerized and can recognize the need for the reactive power in the system and is provided to it before it can be pulled from the power grid.

    Businesses both large and small are charged for their consumption of electricity plus a Demand Charge. It may be called a Power Factor Correction charge, a PHC penalty charge or a Harmonic Balance charge but all businesses in highly populated areas may be charged the Surge fee. Green Energy Panels are designed to reduce or totally eliminate a Surge charge.

  • How do Green Energy Panels work?

    Green Energy Panels provide reactive energy needed when an induction occurs in a system. The GEP provides the reactive energy for an induction that would have otherwise come from outside the facility being pulled into the electrical system from the power grid. This provided reactive energy eliminates a spike in the electrical service which would have moved the power factor out of harmony and increased the electric bills.

    Green Energy Panels are computerized so they can recognize the need for reactive energy in a system. The copyrighted software reacts in less than 2 milliseconds to any induction or increased need in an electrical system. The reaction time of the Green Energy Panels provides reactive power before a spike from outside can occur.

    The reactive energy provided by the Green Energy Panels prevents electrical system overloads by way of increased amperage on a system that brings stress and damage to equipment. Thus the life expectancy of all equipment is greatly increased.

  • How are Green Energy Panels installed?

    Green Energy Panels are installed by any licensed Electrician. There is a NEMA approved schematic is included with every Green Energy Panel shipped.

  • Will Green Energy Panels reduce electric bills?

    Though Green Energy Panels are not allowed to guarantee any percentage of savings in your electric bill, the GEP is certified as a Power Factor Corrective Device (PFC) as well as a Line Surge Arrestor.

    Any starting electric device calls for reactive energy from the outside electric source to start any electrical device (AC, Freezer, conveyor motor, pump, drill, welder, computer bank, lighting, etc…). The power company does not know how much reactive energy is needed so it sends all it has. The result is a surge on the meter, the electric bill, on the device being started and a wave of excess electricity in the form of a surge throughout the facility. When the surge returns to the electrical box, the excess electrical wave escapes out the ground wire and is wasted.

    Green Energy Panels are designed to recognize the need for reactive energy demand via the copyrighted software inside. Instantly the GEP will provide the needed reactive power to start these devices without creating a costly electric company surge.

    Electric bills are reduced in several ways.

    • Reducing the Surge wave of energy from the outside,
    • Saving of the wasted electrical energy,
    • Using that saved energy to help start an electrical device,
    • More efficiency from your electrical equipment.

    All are great reasons for putting Green Energy Panels on any facility.

  • What are the Green Energy Panel sizes?

    The Green Energy Panels come in the sizes to meet the needs of Residential, Commercial and Industrial.

    The standard sizes are:

    • R2401P – RESIDENTIAL – 120/240 volt single phase.
    • C2083P – COMMERCIAL – 120/208 volt three phase.
    • C2403P – COMMERICAL – 120/240 volt three phase.
    • I4803P   – INDUST4RIAL – 277/480 volt three phase.

    Installation is the responsibility of the purchaser and must be done by a licensed electrician.

What Clients Say About Us

  • null

    We did an analysis of our electric consumption since we installed your equipment. We did a retrofit back in 2007 and did not notice much of a change. Your equipment was installed during 2009, so we used 2008 billings and compared to 2010 billings so that we would have a full year without your equipment and a full year with your equipment. In 2008 our billings were $83,132 with an average rate per kilowatt of .125 for 627,408 kw. In 2010 our billings were $36,487 with an average rate per kilowatt of .11 for 312,918 kw. This is a decrease of 314,490 kw or 50%, even with a 3% to 5% variance the savings is still phenomenal. Adding the decrease in maintenance on electrical components such as lighting, computers, air conditioning units, etc. It doesn’t take rocket science to see that this product produces a dramatic decrease in electrical usage.

    Randy Ellis
    CFO – Southwest KIA

  • null

    I am pleased to inform you that your Green Energy Panel exceeded my expectations. The Green Energy Panel was installed in August of 2009. Therefore, in my analysis I compared my electrical usage for the entire year of 2008 without the panel and the entire year of 2010 with the panel. The results of these two years were provided by my electrical supplier, StarTex Power. For the twelve months of 2008 the Kwh usage was 132,690 @ a rate of $0.086 per Kwh for a total of $15,637. For the twelve months of 2010 the Kwh usage was 111,900@ a rate of $0.077 per Kwh for a total of $12,160. The Kwh rate for 2010 reflects a 10% reduction in Kwh charge which when added to the total of $12,160 changes the total charge to $13,376. The difference between the totals in 2008 and those of 2010 reflect a savings for 2010 of 20,790 Kwh or 16% and savings in service charges for 2010 of $2,261 also equaling 16%. I would like to add that I have noticed a significant decrease in maintenance of my lighting and other electrical components after the installation of the Green Energy Panel. I recommend to anyone with electrical requirements similar to mine or electrical needs even greater, to take advantage of the technology the Green Energy Panel incorporates into its outstanding.

    Harry Haribhai
    Owner/Operator – Mr. T’s Convenience Store

  • null

    I am writing today in reference to operation and savings Bell County has had with the installation of Green Energy Panels. After an investigation of utility bills, we quickly noticed a very poor power factor rate in our Expo Center. We purchased several Green Energy Panels at a reasonable cost and installed upon receipt of the equipment. Initially, savings showed up in the second month after installation and even more savings as consecutive months past. Our power factor jumped by 20% and the energy savings continue to save tax dollars every month on utility bills. We are happy with the decision to use Green Energy Panels and will investigate other properties where we can use the Green Energy Panels.

    Joseph Latteo
    Project Manager Director – The State of Texas – Bell County

  • null

    Isn’t it funny how some people like keeping it a secret on how much money they are saving each month?  We love hearing from customers and look forward to hearing from you too.  Tell us about how much our Green Energy Panels are saving you on your electricity bill, power factor and maintenance cost.  Maybe you will be the next celebrity with your picture and testimonial here. What should you do next?  First, we will need to conduct a property survey, get a copy of the last 12 months of electric bills.  Then we can provide an estimate and what the expected return on capital should be.  Go ahead, give us a call and let Green Energy Panels start saving you money month after month, year after year.

    J. O. Monica
    President – Green Energy Panels